We have a large range of wireless IoT sensors with built in sensors or we can use any type of industrial 4-20ma sensor. All sensors are battery powered and can have life time of 1 year to 10 years depending how frequent data is sent. If you require extreme ranges we can use high gain antennas and possible to get a range of 50 KM LOS in the right conditions. The sensors use a mesh type network so the network can be directed through other sensors to increase the range. We can also setup repeater nodes to get sensor data over hills and rough terrain. We can also provide wireless RS485 networks using the same methods. For further information on sensors or to discuss you application please contact us.
sales@mrea.co.nz
WEATHER PROOF
3 Channel Industrial IoT Wireless AC Current Monitor Sensor
This 3 Channel Industrial IoT Wireless AC Current Monitor Sensor is capable of detecting change in current at user defined detection time intervals and sending out data if the current change is greater than user defined detection change percentage.
Industrial IoT Wireless Temperature Humidity Sensor
Incorporating a highly accurate Honeywell temperature humidity sensor, this transmitter will send beacons of ±4%RH ±0.5°C temperature and humidity data at user-defined intervals. The on-board temperature humidity sensor is rated for -40°C to 85°C or -40°F to 185°F
Long Range IoT Wireless Soil Moisture Sensor
This wireless soil moisture sensor makes it possible to monitor soil moisture in multiple locations either outdoors or in greenhouses to monitor soil saturation conditions. Since this wireless soil moisture sensor is based on a analog to digital converter, you can expect to see about 800 different levels of soil moisture from 0 (dry) around 830 (wet).
Industrial IoT Wireless 4-20mA Current Receiver
Incorporates a High resolution 1 channel 16-bit ADC that samples 4-20mA analog inputs at user defined intervals and transmits the result to remote modems and gateways. Optionally, this sensor may be externally powered. This product has capabalities of supporting 6-32V AC/DC external power suply.
Industrial IoT Wireless Predictive Maintenance Sensor
This sensor includes a Vibration Sensor, Thermocouple, 100 Amp AC Split Core Current Sensor, and Ambient Air Temperature Sensor. This IoT Wireless Predictive Maintenance Sensor Samples vibration, RMS current and temperature data and sends after a fixed user-designed interval over the wireless network.
Industrial IoT Wireless Structural Monitoring Sensor
Structural Monitoring sensors are typically used for structural displacement monitoring, allowing movement and shift detection between two points. Install this structural monitoring sensor between footings and walls, or between walls and steel support structures.
Industrial IoT Wireless Linear Displacement Sensor
Linear displacement sensors are typically used for structural monitoring applications, allowing movement and shift detection between two points. Install this linear displacement sensor between footings and walls, or between walls and steel support structures.
Industrial Wireless Absolute & Gauge Pressure and Temperature Sensor
The included sensor is rated for 0-100psi absolute pressure, 0-500psi gauge pressure sensor and 0-1000psi sealed gauge sensor with an accuracy of ±0.5%FS (pressure) ±1.5℃ (Temperature). Easily interfaces using a standard 1/4″ NPT Male connection.
3 Channel Industrial IoT Wireless Thermocouple Temperature Sensor
This wireless thermocouple includes three 5SRTC-TT-K-24-36 K-Type thermocouple probe from Omega.com with a 1m, 24 AWG connection cable, rated for temperature measurement applications up to 260°C (500°F) with an accuracy of ±2.2°C.
Industrial IoT Wireless Water Detect Sensor Transmitter
Water Detection sensor comes with a water detection probe attached to a 4.5 Meter cable, sending a transmission if a wet or dry condition is detected. Receive an alert when a water is detected on a dry sensor or receive another alert when when a wet sensor becomes dry.
Industrial Wireless Thermocouple High Temperature Sensor
Industrial wireless thermocouple temperature sensor includes one XCIB-K K-Type thermocouple probe from Omega.com with a 3 foot cable and 20 AWG connection, rated for temperature measurement applications up to 1090°C (2000°F) with an accuracy of ±1.1°C.
Industrial Wireless Activity Detector
This devices incorporates a high-accuracy acceleration sensor for measuring acceleration changes. These acceleration changes are used to determine mechanical movement (activity). When activity is detected, this device will send a wireless message to a remote gateway or modem, and then go back to sleep for a pre-configured period of time.
Industrial Wireless Vibration And Temperature Sensor
During Power-Up, this vibration sensor learns “normal” base-line vibration from the monitored device. This base-line vibration is subtracted from regular sampled vibration readings to improve relevant vibration data. Ideally, the monitored device should be off while the sensor is learning.
Tank Level Sensor Ultrasonic Long Range Wireless
Wireless IoT Ultrasonic Tank Level Sensor transmits highly accurate tank levels as distance values at user-defined intervals. The Ultrasonic tank level sensor features 1mm resolution with a distance measurement range of 40 to 9999mm.
Industrial IoT Wireless RTD Temperature Sensor
This Industrial Wireless RTD Temperature Sensor transmitter support any 100 Ohm 3-Wire RTD sensor, and includes a free RTS PT100 probe for the purposes of experimentation and testing within room temperature environments, but best results are achieved when connecting a high-quality sensor that meets your application requirements.
Industrial IoT Wireless CO2 Temperature Humidity Sensor
CMOSens® Technology for IR detection enables highly accurate carbon dioxide measurement at a competitive price. Along with the NDIR measurement technology for CO2 detection, a best-in-class humidity and temperature sensor is also integrated on the same sensor module. Ambient humidity and temperature can be outputted by Sensors’s algorithm expertise through modeling and compensating of external heat sources without the requirement for any additional components.
Industrial IoT Wireless Particulate Matter Sensor
Long Range Industrial IoT Wireless Particulate Matter Sensor for Air Quality Monitoring with an integrated temperature humidity sensor, boasting up to a 5 KM range using a wireless mesh networking architecture.
INDOOR
IoT Long Range Wireless Precision Pressure Sensor Bidirectional Differential
Incorporating a SDP8XX series high-resolution medical grade pressure sensor, this IoT Wireless Precision Pressure Sensor samples pressure and temperature data, then transmits these data to user defined receiver(s)
IoT Wireless TVOC CO2eq Temperature Humidity Gas Sensor
The on-board temperature sensor is rated for -25°C to 85°C or -13°F to 185°F and the humidity sensor is rated for 0 to 100% RH (non condensing).
IoT Long Range Wireless 0-24VDC Voltage Monitor
Long Range IoT Wireless 0-24VDC Voltage Monitor with 10-Bit Analog to Digital Converter (ADC), boasting up to a 5 KM range using a wireless mesh networking architecture.
IoT Long Range Wireless RTD Temperature Sensor Transmitter
This Industrial Wireless RTD Temperature Sensor transmitter support any 100 Ohm 3-Wire RTD sensor, and includes a free RTS PT100 probe for the purposes of experimentation and testing within room temperature environments, but best results are achieved when connecting a high-quality sensor that meets your application requirements.
IoT Long Range Wireless AC Current Detection Sensor
The input current range is 0-100A, sending a transmission if any state of the current changes. Receive an alert when AC current value exceeds the preset value, receive another alert when the AC current drops below preset value.
IoT Long Range Wireless 24V AC/DC Voltage Detection Sensor
This IoT long range wireless 24V AC/DC Detect sensor transmitter includes One Optically isolated Voltage input. This input can be used to detect both AC or DC inputs. The input voltage range is 0-24V, sending a transmission if any state of the inputs change. Receive an alert when voltage is detected, receive another alert when the voltage is lost.
Long Range IoT Wireless DC Voltage Monitor (0-10V)
This Wireless DC Voltage Monitor can measure up to 10V DC voltage input with the ability to detect a change in voltage every 7 seconds (user configurable) and sending out ADC samples if the change in voltage is greater than 10% (user configurable). Wireless 0-10V DC Voltage Monitor 10-Bite Analog to Digital Converter (ADC)
Long Range IoT Wireless 4-20mA Current Receiver
This IoT Wireless 4-20mA Current Receiver has an additional feature of detecting change in voltage every 7 seconds (user configurable) and sending out ADC samples if the change in voltage on any channel is greater than 10% (user configurable). Incorporates a 1 channel 10-bit ADC that samples 4-20mA analog inputs at user defined intervals and transmits the result to remote modems and gateways.
Industrial Wireless Activity Detector
This activity detector has numerous configuration parameters available that may be fine-tuned for your specific application. Set parameters for acceleration range, data rate, interrupt duration, and interrupt threshold. With the ability to detect movement in all directions, acceleration limits (in g units) can be defined for all 3 axis of movement.
IoT Long Range Wireless Asset Monitor Sensor
Incorporates a precision acceleration sensor for measuring acceleration changes. Utilizing the interrupt feature of this sensor, it is able to minimize power consumption by making most of the components go to sleep while waiting for the interrupt from the sensor.
IoT Long Range Wireless Acceleration and Impact Detection Sensor
Configure the Impact Detection condition (interrupt settings) using configuration mode. This impact detector offers many configuration parameters, including acceleration range, data rate, interrupt duration, and interrupt threshold. Interrupt duration is dependent upon data rate.
IoT Long Range Wireless Multi Channel Dry Contact Closure Transmitter
This IoT Wireless Multi Channel Dry Contact Closure Transmitter detects up to 7 push inputs with low latency and sends out a frame, while sleeping the rest of the time to minimize power consumption.
IoT Long Range Wireless Multi Channel Wet Contact Closure Transmitter
This Long Range IoT Wireless Multi Channel Wet Contact Closure Push Notification Transmitter is capable of detecting DC as well AC voltage inputs. The input voltage range is 2.25V-32V, all inputs are optically isolated.
Long Range IoT Wireless Analog Digital Converter (3.3V)
Incorporates a 2 channel 10-bit ADC that samples analog inputs at user defined intervals and sends a wireless transmission to remote gateways and modems.
IoT Long Range Wireless Vibration And Temperature Sensor
This Industrial IoT wireless vibration sensor samples 3-axis of Vibration data for 100ms and then calculates RMS, Maximum, and Minimum vibration readings. This sensor combines these data with temperature data in a data packet, and transmits the result to modems and gateways within wireless range.
IoT Long Range Wireless Two Channel Counter Transmitter
This counter incorporates two low latency 16-bit counters that never miss a pulse, even during sleep. If a pulse arrives at either input, it wakes up and adds to the input count.
IoT Long Range Wireless Accelerometer Gyro Magneto & Temperature Sensor
Incorporating a precision acceleration sensor, this device transmits highly accurate data at user-defined intervals. It samples 3-axis of Accelerometer, Gyroscope, Magnetometer and combines with temperature data and sends a transmission on regular intervals. After a data transmission, this sensor goes back to sleep.
IoT Long Range Wireless Pressure and Temperature Sensor
Measure pressure and temperature with user configurable resolution at user defined intervals. During sleep, this IoT sensors enters a ultra-low power state to conserve battery life. This IoT sensor takes baseline pressure and altitude input to determine subsequent change in pressure and altitude.
IoT Long Range Wireless Proximity and Light Sensor
This IoT Wireless Proximity Light Sensor has an additional feature of detecting change in proximity and ambient light every 3 seconds (user configurable) and sends a data transmission if a change of greater than 10% (user configurable) is detected.
Long Range IoT Wireless Light Sensor
This device incorporates a precision Digital Ambient Light Sensor and wireless transmitter that wakes up, sends data, and goes back to sleep at user defined intervals. This Long Range Wireless IoT Light Sensor has an additional feature of detecting changes in ambient light every 7 seconds (user configurable) and sending out samples if the change is greater than 10% (user configurable).
IoT Long Range Wireless Thermocouple Sensor (High Temperature Sensor)
This wireless thermocouple includes one 5SRTC-TT-K-24-36 K-Type thermocouple probe from Omega.com with a 1m, 24 AWG connection cable, rated for temperature measurement applications up to 260°C (500°F) with an accuracy of ±2.2°C.
IoT Long Range Wireless Temperature Humidity Sensor
Incorporating a precision Honeywell® temperature and humidity sensor, this transmitter will send beacons of high-accuracy ±4%RH ±0.5°C temperature and humidity data at user-defined intervals. The on-board temperature humidity sensor is rated for -40°C to 85°C or -40°F to 185°F.
IoT Long Range Wireless Push Notification Dry Contact Transmitter
This IoT long range wireless push notification transmitter includes 2 contact closure inputs, sending a transmission if any state of the inputs change. Receive an alert when a button is pressed, receive another alert when the button is released. This IoT long range wireless push notification device is ideally used in security applications that need a reliable long-range wireless dry contact transmission.
IoT Wireless PIR Motion Detection Sensor
This IoT Wireless PIR Motion Detection Sensor incorporates a high-accuracy 5m Range Panasonic Passive IR PIR Sensor. Designed to cover a wide area, this sensor detects human presence.
IoT Long Range Wireless Environmental Temperature Humidity Pressure Air Quality Sensor
Incorporating a high-resolution sensor, this device samples and processes temperature, pressure, humidity and gas resistance. Once environmental data is collected, it transmits this information to a gateway or modem up to 5 KM away. The whole process is repeated at user-defined intervals.
IoT Long Range Wireless Pulse Frequency Meter Sensor
This IoT Wireless Pulse/Frequency Meter has an additional feature of detecting change in frequency and duty cycle at user defined detection time intervals and sending out data if the change is greater than a preset range.
END NODES + NETWORKING
Wireless 4-20mA Current Loop 4-Channel Input endNode
Read industrial 4-20mA pressure sensors, temperature sensors, flow meters, ultrasonic sensors, level sensors, force sensors, weight sensors, distance sensors, strain sensors, and much more.
Wireless 4-20mA Output Current Transmitter 4-Channel USB endNode
Control Dampers, Sprinklers, Flow control Valves, Actuators, Solenoids, and Motor Drives. The 4-20mA Output of the ASM1-4 are compatible with 4-20mA digital panel meters and PLCs that accept a 4-20mA DC current input.
Wireless 0-10V 4-Channel Input USB endNode
Read industrial 0-10V pressure sensors, temperature sensors, flow meters, ultrasonic sensors, level sensors, force sensors, weight sensors, distance sensors, strain sensors, and much more with a 12-Bit Resolution.
Wireless 0-10V Output Transmitter 4-Channel USB endNode
Control Dampers, Sprinklers, Flow control Valves, Actuators, Solenoids, and Motor Drives. The 0-10V Output of the ASM1-5 are compatible with 0-10V digital panel meters and PLCs that accept a 0-10V DC voltage input.
Wireless 4-Channel IoT Relay Controller 10-Amp endNode
Control Pumps, Valves, Motors, Lights, Heating Elements, Backup Refrigeration Systems, Activate Emergency Generators, Emergency signage and Alarms with only a few simple commands.
Industrial IoT RS485 To Wireless Converter
This RS485 to Wireless Converter can also be used to replace RS485 wired connections with a reliable long range wireless communication technology. Connect to the NCD wireless sensor ecosystem using the industry standard RS485 communications.
Long Range Wireless Mesh Modem with USB Interface
Communicating with a Wireless Device does NOT have to be complicated. Our line of 900HP-S3B modems allow first time users to communicate with ANY 900HP-S3B device on the site with a absolute maximum possible range of 28 miles (using high-gain antennas).
Wireless 4-20ma Transmitter Receiver 4 Channel Pair
To put it simply, the wireless 4-20ma transmitter receiver products will monitor 4-20mA signals on the input board and wirelessly tell the receiver board to set it’s 4-20mA outputs to the same state. These devices are sold in pairs and operate on a one to one basis with no computer or configuration necessary.
Wireless 0-10V Output Transmitter 4-Channel USB endNode
Control Dampers, Sprinklers, Flow control Valves, Actuators, Solenoids, and Motor Drives. The 0-10V Output of the ASM1-5 are compatible with 0-10V digital panel meters and PLCs that accept a 0-10V DC voltage input.
Wireless 4-20mA Current Loop 4-Channel Input endNode
Read industrial 4-20mA pressure sensors, temperature sensors, flow meters, ultrasonic sensors, level sensors, force sensors, weight sensors, distance sensors, strain sensors, and much more.
With the EndNode you can connect a huge range of I2C Node-Lynk Sensors/Devices. There are over 300 sensors/Devices to choose from ranging simple sensors to 4-20ma interfaces and relay or solid state output control. These I2C sensors don’t come in enclosures or anything, so custom mounting is required to protect the sensors. For further information and enquirers please contact us at sales@mrea.co.nz or visit NCD.IO
